SolisTek Matrix SE/DE
Digital Ballast [STK1001LCD]


Matrix Ballast
Matrix Remote Control

$399.99 Ballast Only
$29.99 Remote Control

*NEW* SolisTek MATRIX SE/DE 1000W Digital Ballast

Designed for Double & Single Ended Lamps
STK1001LCD 120/240V (208V Compatible)
Multi-Wattage, Multi-Voltage, Dimmable - 8.75A @ 120v - 4.375A @ 240v - Generator Ready
(Remote Control Sold Separately, only 1 remote needed for all MATRIX ballasts)

Wattage settings: 1100W, 1000W, 825W, 750W, 660W, 600W

1000 / 750/ 600W Digital Ballast with Remote Control and Built-in Digital Timer
Operating at ultra high output frequency 106+kHz

Matrix Digital Ballast

The SolisTek Matrix Ballast is a true digital ballast on a software based platform.  SolisTek offers true
digital light systems for the horticulture industry. Our ballast boasts exciting new features that are
revolutionizing urban gardening.

Remote Control

The exclusive SolisTek remote control will allow you to wirelessly configure the wattage settings
from over 70ft away and also set the integrated digital timer for your SolisTek Matrix Ballast(s). 
The Matrix remote control allows as many Matrix ballasts to be synced to the same schedule
eliminating the need for an external controller.

Bbuilt in digital timeruilt in Digital Timer
Completely customizable on/off schedule settings for any grow cycle. Sync all SolisTek
Ballasts on the same schedule with only 1 remote control.  Eliminate unnecessary external

Gmatrix ballastreen LCD Screen
Digital green read-out to visually display ballast settings and won't disrupt plant
sleep cycle. Dark cycle-friendly!

Ballast Life Timer 
Onboard ballast 'odometer' that will count the number of hours the ballast has been
used. Industry's only ballast life timer! (multiply unit by 10 for actual usage hours)

Total Harmonic Distortion (THD): 
SolisTek Digital Ballasts are tuned for minimal Total Harmonic Distortion (THD%).  SolisTek ballasts
offer the cleanest burning ballast the industry has to offer.  The results are longer ballast and lamp life
and less depreciation of lumen and par output over time.

Ignition Control™:

Sequential lamp ignition technology that will ignite your lamps one at a time based on load stability. 
This revolutionary technology (not a randomized startup) will actually detect the voltage and amperage
frequencies of the electrical circuit and fire lamps when the load is most stable. SolisTek digital ballasts
are the only ballast capable of this technology.

Prevent surges and spikes in your electrical environment and stop overloading breakers. When you
power multiple SolisTek ballasts, the electrical draw is controlled by our internal software, maximizing
your electrical efficiency.

Soft-Start technology are standard in all SolisTek Digital Ballasts.

Pre-ignition self-diagnostic checks, which will check for 8 different factors before attempting to power
the lamp.

SenseSmart™ checks for:
- Open Output                     - High/low temps (internal)
- Ignition Failure                  - Thermal
- End of Lamp Life               - Overflow Current
- Over/Low Voltage              -Short Circuit

Solis Boost Overdrive:
SolisTek's overdrive does not harm the longevity of the lamp.  Contrary to industry standards, Solis Boost
will only overdrive the lamp by 10%.  Because STK ballasts are rated so efficiently, the extra boost in
power will not affect the lamps lumen depreciation or shorten lamp life.